KTA 100
The KTA 100 replaces our long standing - best selling Model One.5 amplifier which made Korato internationally known.
Complete dual mono construction with two 500VA toroidal transformers, 25A bridge and 144,000 uF of filter caps in the power supply, a completely symmetrical push-pull circuit with 3 pairs of Motorola bipolar transistors in the output stage of each channel, internal wiring is VdH SCS 12/18 and all connectors are gold plated/teflon insulated. The KTA 100 operates in class A up to 30 W.
Complete dual mono construction with two 500VA toroidal transformers, 25A bridge and 144,000 uF of filter caps in the power supply, a completely symmetrical push-pull circuit with 3 pairs of Motorola bipolar transistors in the output stage of each channel, internal wiring is VdH SCS 12/18 and all connectors are gold plated/teflon insulated. The KTA 100 operates in class A up to 30 W.
A great little powerhouse!
|
Power / 8 Ohm: |
100W (30W Class A) |
|
Power / 4 Ohm: |
200W (55W Class A) |
|
Frequency response: |
4Hz-157kHz |
|
Distortion (THD): |
<0.1% |
|
Damping factor: |
>200 |
|
Gain: |
28dB |
|
Sensitivity: |
1.1V |
|
Dimensions: |
480x175x440mm |
|
Weight: |
23kg |
KVP 20
KVP 20 is Korato's basic tube preamplifier. It has five line inputs and is a one box unit. A second ouput is available at no extra charge. Inside KVP 20 has four valves (two ECC81 and two ECC82) in the audio section and one (ECL 82) valve in the power supply with ultra fast recovery diodes.
Internal wiring is VdH CS-18/C5 cable, has a Alps volume pot, all of the connectors are gold plated with teflon insulation and signal capacitors are Mundorf polypropylene. We use Spectra Dynamics anti resonant feet to block any unwanted acoustic feedback. KVP 20's design has no global feedback, a feature shared with our other preamplifiers. RF Remote control for volume is optional.
Internal wiring is VdH CS-18/C5 cable, has a Alps volume pot, all of the connectors are gold plated with teflon insulation and signal capacitors are Mundorf polypropylene. We use Spectra Dynamics anti resonant feet to block any unwanted acoustic feedback. KVP 20's design has no global feedback, a feature shared with our other preamplifiers. RF Remote control for volume is optional.
A great budget preamp!
|
Frequency response: |
8Hz-80kHz |
|
Distortion (THD): |
0.15% |
|
Gain: |
15dB |
|
Output impedance: |
470 ohms |
|
Dimension: |
480x72x300mm |
|
Weight: |
6kg |
KPV 10
KVP 10 is the best selling Korato product. It has five line inputs of which the first can become a phono input, if you choose to buy the KVP 10 with the optional phono stage.
Internally KVP 10 has two valves in the line section ( two ECC82/12AU7) and four valves in the optional phono section (four ECC83/12AX7). Internal wiring is VdH CS-18/C5 cable, has a Black Beauty Alps potentiometer, all of the connectors are gold plated with teflon insulation and signal capacitors are Hovland polypropylene with ultra fast recovery diodes in the PS. We use Spectra Dynamics anti resonant feet to block any unwanted acoustic feedback. KVP 10 has a separate power supply box with dual mono construction and valve voltage regulation (two ECL 82). Each channel is powered with it own 50VA toroid transformer. KVP 10 has no feedback. The phono section has passive RIAA equalization. Remote control for volume is optional.
Internally KVP 10 has two valves in the line section ( two ECC82/12AU7) and four valves in the optional phono section (four ECC83/12AX7). Internal wiring is VdH CS-18/C5 cable, has a Black Beauty Alps potentiometer, all of the connectors are gold plated with teflon insulation and signal capacitors are Hovland polypropylene with ultra fast recovery diodes in the PS. We use Spectra Dynamics anti resonant feet to block any unwanted acoustic feedback. KVP 10 has a separate power supply box with dual mono construction and valve voltage regulation (two ECL 82). Each channel is powered with it own 50VA toroid transformer. KVP 10 has no feedback. The phono section has passive RIAA equalization. Remote control for volume is optional.
| Frequency response: | 8Hz-110kHz |
| Distortion (THD): | 0.1%/0.15% (line/phono) |
| Gain: | 15dB/42 dB (line/phono) |
| Output impedance: | 190 ohms |
| Dimension: | 480x65x300mm |
| Dimension of power supply: | 483x65x250mm |
| Weight: | 10kg |